Product description:
Features
- iGyro, integrated: 3-axis gyro system with heading function
- Extended setting wizard for easy operation
- Special control algorithm for surface models
- 6 independent gyro outputs Outputs for: 2x aileron, 2x elevator, 2x rudder
- Special thrust vector support
- GPS controlled gyro sensitivity
- High-precision 6-axis MEMS sensor
- Built-in delta and V-tail mixer
- Door sequencer: freely programmable outputs with setting assistant
- Servo match function: servo center, end points and servo reverses for all 15 servo outputs
- SRS: Serial Receiver System for the possibility to use receivers with a serial interface, P²BUS, S-Bus, M-Link, EX-Tele, DSM2 / DSMX, X-BUS and HoTT
- Free channel assignment of all 15 PowerBox outputs
- Graphic OLED display with 128x64 pixels
- Particularly user-friendly menu-controlled programming with the sensor switch
- 15 channels
- Pulse amplification and interference suppression for all 15 outputs
- Flight recorder, recording of lost frames and failsafe phases
- Adjustable frame rate between 12ms - 21ms
- 16bit processor for high resolution and fast signal processing
- Double regulated output voltages for receivers and servos
- Adjustable output voltage, regulated by 5.9V or 7.4V
- Connection possibility for the return channel bus systems P²BUS, S-Bus, M-Link, EX-Tele, DSM2 / DSMX, X-BUS and HoTT
- Transmission of battery information, receiver data and GPS data directly to the transmitter
- Voltage display for each battery separately
- Minimum value memory shows possible voltage drops
- Large cooling surfaces for high controller performance
- Controller monitoring and controller error display
- 4 battery types are supported: LiPo / LiIon, NiMH / NiCd, LiFePo
- Suppression of possible servo reverse currents
- Can be updated with the USB interface or the BlueCom adapter
|
|
Back
